Tattoo Artist Magazine

Courtesy of Tattoo Archive: Percy Waters was one of the great tattooists/suppliers in the history of our business. Over the years he produced machines with many different frame designs and in his catalog he offered a full line of supplies. Waters was an old-school supplier and the machines that he offered were set-up to operate with connector cords. If you look at photographs of tattooists working in the early 1900s, you will notice a mass of wires on their work stands. These wires connected them machines to their power supply. The clip-cord had not been invented yet, so each machine had its own cord...  As with most suppliers of his era Waters offered several starter kits which were called outfits at that time. The top of the line of Waters' outfits was his Professional Tattooing Outfit, which included four machines, switchboard, 8 ½ pound bag of red, brown, green and yellow, a pint of liquid pearl black ink, an instruction booklet, 20 sheets of colored flash, foot switch, cord, a sheet of celluloid and a stencil cutting tool. An $89.25 value for only $85.00! From the Professional Outfit it went down to the Compacted Outfit for $25.00, then to the Economical Outfits at $9.75 and $19.50, the Amateur Outfit at $6.00, the Beginners at $5.00 and finally his Hand Tattooing Outfit starting at $1.50. The basic hand outfit included one set of hand needles, a jar of red and black ink and a sheet of designs. Waters sold so many outfits that he started having to number them in his promotional materials; he must have run out of names! The Amateur Outfit that Waters sold included an outlining and shading machine that he described as the “Deluxe.” This was an interesting frameless machine that we have never seen, except in an illustration. The whole top end of the machine (back spring mount and contact point) is mounted off the top of the coil cores. From the illustration in Waters’ flyer it is hard to imagine how the connector cords are hooked up to this machine, there are no visible connectors. I would like to thank Aaron Coleman for his great illustrations, of the Deluxe machine and the Waters ribbon & flowers, included with this article. Captions
  1. Percy Waters business card, 1930s.
  2. Illustration by Aaron Coleman of Percy Waters’ “Deluxe” machine.
  3. Description of Percy Waters’ “Amateur Outfit”, from 1920s catalog.
  4. Percy Waters supply envelope, 1933, Courtesy of Temple Tattoo Museum.
  5. Illustration by Aaron Coleman.
Tattoo Archive © 2011

This installment of For the Record was featured in Tattoo Artist Magazine issue #28.

Written by 24471382 — March 20, 2012

Leave a comment

Please note: comments must be approved before they are published.


Tattoo Artist Magazine and the individuals we represent stand behind every item sold in our store. Note, all supplies are available to purchase ONLY by setting up an account with us. We will check to make sure you are a PROFESSIONAL TATTOO ARTISTS BEFORE SHIPPING

Thanks, TAM


We promise to only send you good things related to Tattoo Artist Magazine and Get TAM only.